13 motorized faders: 12 line up with the analog output / summing and monitoring
section; 1 master. Faders track the DAW. Above each fader: a motorized encoder
for the 12 outputs and pan (plus the master strip as designed). Push an
encoder to choose the send layer: e.g. push encoder 1 — all sends use send 1;
push encoder 2 — all sends use send 2, and so on.
Digital control, analog path: Touch and 6-DOF knob are digital control for analog
components — not a “firmware feature list.” The audio chain stays analog; the
screens set what the hardware does.
Parameter focus: When you pick a stage on the main touch grid, detail concentrates on the
smaller touchscreen to the right (above the control knob). The gold 6-DOF knob
is SpaceMouse-style parameter control for whatever stage is armed.
Face & materials (same line as racks)
Chassisbacklit · acrylic · gold
Enclosure
Backlit LED · black acrylic · see-through — same language as the left and right rack units.
Hardware
Gold-finished knobs and the parameter 6-DOF knob (polished gold / brass family).
Main touchscreen (above faders & encoders)
12 columnsone touch = channel + stage
What it does
This touch area selects which part of the analog chain you’re editing, per channel, in stack order:
REC · mic pre · harmonics · compressor · equalizer ·
transient design · effects. Stage definitions match the left rack —
not re-described here.
Record location
Record is on the main 12-column touchscreen strip (REC row per channel), not on scribble long-press.
Left edge — transport & automation
Vertical touch strip
Transport
Touchscreen — rewind, fast-forward, stop, play, record (standard transport cluster).
Automation
Icons / modes for automation and routing aids on the same left strip (layout per CAD).
Scribble strip (below faders)
Touch scribble · per-channel
Voice naming
You can name channels by voice — assign / edit scribble labels with voice (in addition to touch).
Bank
Swipe horizontally to move fader banks / layers.
Mute / solo
Single tap — mute. Double tap — solo. Tap again to release (same strip).
Right — focus screen, 6-DOF knob, monitor controls
Small touchscreen · 6-DOF knob · trims · monitor
Focus LCD
Smaller touchscreen above the 6-DOF knob — shows the focused parameters for whichever rack stage you selected on the main grid.
6-DOF knob
Large gold SpaceMouse-style knob — 6‑DOF parameter control; primary edit surface when a stage is armed.